Oxygen corrosion occurs in the system pipeline and economizer, generating a large amount of iron oxide. Iron oxide is an oxidizing substance that continuously consumes reducing oxygen scavengers. This situation is generally accompanied by an increase in iron content in the water, which will exacerbate corrosion in the long run.

During the continuous operation of industrial circulating cooling water systems, water continuously evaporates, and calcium and magnesium ions, suspended solids, and microorganisms in the water gradually accumulate, which can easily lead to scaling, corrosion, and bacterial and algal growth, affecting the efficiency of heat exchange equipment and increasing the risk of pipeline blockage and equipment damage.

In water treatment scenarios such as industrial circulating water, municipal sewage, pure water preparation, and wastewater reuse, water treatment agents are key materials to ensure water quality meets standards and protect the stable operation of equipment.

In the operation of boiler water treatment system, chemical deoxygenation is the core process for preventing and controlling oxygen corrosion of pipelines and furnace bodies, and ensuring stable operation of boilers.

Water treatment equipment often operates in humid, humid, and prone to condensation environments such as water plants, sewage treatment stations, chemical workshops, water purification plants, and outdoor pump rooms. The electrical components such as distribution panels, contactors, relays, frequency converters, sensors, and line terminals that come with the equipment are prone to moisture, condensation, and water ingress problems when exposed to high humidity environments for a long time.

There is continuous dissolved oxygen inside the boiler water circulation system, which can cause electrochemical corrosion to metal components such as the boiler steam drum, water-cooled wall, pipeline, and economizer. Long term operation can easily lead to problems such as thinning of the pipe wall, pitting, perforation, leakage, and shutdown, shortening the service life of the entire thermal equipment.

Surface water, groundwater, and municipal tap water generally contain calcium, magnesium, bicarbonate, sulfate, and silicate ions. During reverse osmosis filtration, water molecules pass through the RO membrane, and various salt ions are trapped on the concentrated water side, increasing with the concentration factor

In water treatment systems such as industrial circulating water, pure water preparation, central air conditioning, and boiler water supply, water bodies generally contain mineral components such as calcium, magnesium ions, and bicarbonate ions.

Boiler deoxygenation agent is a key chemical to ensure the safe and stable operation of boilers. It is mainly used to remove dissolved oxygen in boiler water, prevent corrosion and scaling of the boiler inner wall, and extend the service life of equipment.

During the operation of the boiler, dissolved oxygen in the water can corrode the metal tube walls of the boiler, causing thinning and damage to the tube walls, shortening the service life of the boiler, and even posing safety hazards.

The industrial circulating water system is an indispensable supporting facility for factory production, refrigeration, and heat exchange. During long-term cyclic use, water bodies are prone to problems such as scale formation, corrosion, bacterial growth, and turbidity, which affect heat exchange efficiency and equipment service life.

Boiler is a key thermal equipment in industrial production and heating systems, and water quality control is an important link to ensure the stable operation of boilers and extend the service life of equipment.