Basic knowledge of installation and use of water treatment equipment

Among water purification equipment, water purification equipment, soft water equipment, and ultra pure water equipment are more common. Soft chemical water equipment is a type of water treatment device that can remove calcium and Mg plasma from water, reduce water hardness, and make water softer. The softened water equipment has good water quality and stable system operation, and is used by many enterprises; The water quality from ultra pure water equipment is good, suitable for the production needs of various enterprises, and the scope of use is gradually expanding. Water Purifier

Basic requirements for water quality of water treatment equipment

Purified water extracted from water treatment equipment is used in medical, biomedical, and other industries. What are the main standards for purifying water quality? Both the Chinese Pharmacopoeia and the European Pharmacopoeia explicitly state that raw water used for pharmaceutical purposes should at least meet drinking water standards. If it does not meet the standards, evolutionary processing will be carried out first until the standards are met.

Except for clearly defined Escherichia coli, other slender bacteria should not exceed 100/ml. Internal contamination also occurs during the water treatment process of water treatment equipment, and various water treatment devices in water treatment equipment may become sources of pollution. Therefore, water treatment equipment must be regularly cleaned and disinfected, and in addition, bacterial disinfection devices must be installed at the end of the water treatment equipment.

Water quality characteristics of wastewater treatment equipment

The water quality of the water treatment equipment meets the national hygiene standards and conforms to the actual production standards of the enterprise. The output of water purification equipment - purified water has two characteristics. A significant feature is the gradual increase in the number of bacterial disinfection equipment in water treatment facilities.

Another feature is that the pipeline distribution system in water treatment equipment replaces traditional water pipes with circulation pipelines, both of which aim to control microbial contamination and the increase of microbial endotoxins. At the same time, pay attention to the impact of flow velocity inside the pipe on microbial reproduction, that is, low or blocked flow velocity inside the pipe can lead to an increase in microbial reproduction and affect water quality.

Selection of elements for installation location of soft chemical water equipment

Soft chemical water equipment should be located as close as possible to the drainage ditch.

If other water treatment equipment is required, installation space should be reserved.

Due to the frequent addition of salt to the salt tank, it is necessary to determine the location of the salt.

Do not install soft chemical water equipment within 3 meters of the boiler, otherwise hot water will return to the soft chemical water equipment and cause damage.

Soft chemical water equipment should be placed in an environment with room temperature below 1 ° C and above 49 ° C.

Installation standards for ultrapure water equipment

1. The installation location of the equipment should be chosen in a smooth and clean environment, close to power and water.

Do not approach fire sources or any heaters to avoid heat affecting their efficiency.

In the northern region, it is not allowed to install equipment outdoors to prevent internal freezing and damage to instruments and filters

4. Equipment installation should facilitate drainage and keep the equipment drainage pipe stable.

The working pressure of the pump used in the system is 1.0-1.2 MPa, allowing the pump to operate within the rated head range.